|
SAILOR System 5000 MF/HF
Comprising a thoroughly thought-through design, the SAILOR System 5000 MF/HF ensures great and intuitive operability within voice communication, DSC and radiotelex features. Large tactile knobs and local languages are also some of the main features developed with the user in mind. Moreover, the system offers night vision display, one touch alarm mute button and crystal clear audio at all times. Naturally, the SAILOR System 5000 MF/HF fully complies with all GMDSS safety requirements for sea area A2, A3 and A4.
 The logical menus shown in the large TFT display can display more than three hundred characters at a time. All text in the display is in red in order to minimize the disturbance of the night vision. A Marine AR (anti-reflection) filter reduces the reflection from the sun and other ambient light sources. The display is designed to be easy to read even from very wide angels, enabling the operator to read the display when engaged in another operation.
The SAILOR System 5000 is available in 150W, 250W and 500W versions. It is operated from the robust and compactly designed Control Unit (CU5100) which controls the powerful Transceiver Unit (TU5150/TU5250/TU5500) and the fast Antenna Tuning Unit (ATU5215/ATU5515).
 The Control Unit offers large, tactile buttons and rotary knobs that make it easy to operate even in the harsh environment at sea - both with and without gloves. The Mute Alarm button mutes not only all the alarms on the Control Unit, but also the alarms on the Alarm Panel (AP5065) if such is included in the installation.
The SAILOR System 5000 MF/HF is based upon a proven technology and design that has demonstrated high reliability and durability. The 150W and 250W versions uses convectional cooling of the system, with no fans or other moving parts, and the 500W version is cooled by means of fans. The highly effecient systems ensures full power and dependable communication on all channels.
The three unit SAILOR System 5000 MF/HF offers truly flexible installations. The system is available as versions with 1 channel DSC watch receiver D1, in which a D6 channel watch receiver can be enabled, with no hardware changes needed. Likewise radiotelex can easily be enabled and installed.
 The compact Control Unit (CU5100), with the built-in loudspeaker, requires a minimum of space and can be installed up to 100 meters from the transceiver units. The highly efficient Antenna Tuners (ATU5215/ATU5515) is designed for outdoor installations and can be installed up to another 100 meter away from the Transceiver Unit.
The Control Unit (CU5100) is identical for both the 150W, 250W and 500W systems. Even the Antenna Tuner (ATU5215) is identical for both the 150W and 250W systems, whereas the Antenna Tuner is different for the 500W system. The Transceiver Units are all build on the same principle even though they are three different products.
Specification:
| Operating modes: | Simplex and semi-duplex SSB telephony and DSC, TELEX AM broadcast reception
| | Frequency range: | 150 kHz to 30 MHz (Rx)
1605 kHz to 30 MHz (Tx)
| | Supply voltage:
| Nominal 24VDC floating
With optional external AC power supply: 115/230VAC 50/60 Hz. Automatic change-over to DC in the absence of AC supply
| | Power consumption (150W): | RX 60W (approx. at 24VDC)TX, SSB speech: 300W TX, SSB two-tone: 550W TX, DSC/Telex: 600W
| Power consumption (250W): | RX 60W (approx. at 24VDC)TX, SSB speech: 175W TX, SSB two-tone: 300W TX, DSC/Telex: 420W
| Operating temp. range: | -20°C to +50°C
| | RECEIVER:
| | Aerial impedance: | 50Ω automatically matched by the aerial tuning unit
| | Sensitivity: Aerial input for 10 dB SINAD, 50Ω aerial: | SSB tel.: 0.7 µVAM tel.: 4 µV DSC/Telex: 0.7 µV
| TRANSMITTER: | | Audio output power:
| 4W with less than 10% distortion
| | Output power:
| 150W PEP ±1.4 dB voice. Reduction to 80W when continuously keyed single tone,with duty cycle greater than 55% during 1 min. Automatic power recovery after 1 min
250W PEP ±1.4 dB voice. Reduction to 100W when continuously keyed single tone, with duty cycle grater than 55% during 1 min. Automatic power recovery after 1 min.
500W 1.6 to 3.999 MHz 400W PEP +0/-1.4 dB voice. 4.0 to 29.999 MHz 500W PEP ±1.4 dB voice. 3 dB reduction when continuously keyed single tone, with duty cycle grater than 55% during 1 min. Automatic power recovery after 1 min.
| | Power reduction: | Low approx. 10W
| | Frequency range: | ITU marine bands from 1605 kHz to 30 MHz
| | DSC-TELEX MODEM:
| | DSC Equipment class: | Class A
| | Protocols: | DSC: ITU-R M. 493.12, M. 541-6, and M. 1082.
Telex: ITU-R M. 625-2 (incl. M. 476-4), M. 490, M. 491-1, and 492-5 NBDP telex in ARQ, FEC and SEL FEC modes
| | Ship’s identity:
| DSC: 9-digit identity numberTelex: 5- and/or 9-digit identity numbers
| Interfaces:
| -Alarm: DSC distress alarm interface-NMEA: NMEA 0183 interface for GPS equipment COM: PC interface for SCANCOMM telex control. RS-232, baud rate 9600 bps -Remote transceiver control interface for control of frequency, mode and power level. T+Bus protocol, baud rate 2400 bps
-Line, Key: Transceiver AF line input/output and external key interface. -10 to +10 dBm, 600W -AUX alarm 2: Telex and nondistress/urgency DSC alarm output
| DSC WATCH RECEIVER:
| | Frequency range: | 2187.5 KHz, 4207.5 kHz,
6312.0 KHz, 8414.5 kHz,
12577.0 KHz, 16814.5 kHz
| | Aerial impedance: | 50Ω Complies with ETSI 300-373 or better
| | AERIAL COUPLER:
| | Frequency range: | 1.6 MHz - 27.5 MHz
| | Aerial requirements: | 8-18 m wire and/or whip aerial
| | Aerial tuning: | Fully automatic with no presetting |
| Tuning speed: | 0.1 - 8 sec Typical
| | Power capability: | 330W PEP in 50Ω
| Dimensions:
Transceiver Unit:
Antenna Tuning Unit:
Control Unit: |
390 × 445 × 127 mm
290 × 500 × 80 mm
200 × 100 × 95 mm
| Weight:
Transceiver Unit:
Antenna Tuning Unit:
Control Unit:
|
19 rg
3.3 kg
1.5 kg
| | | | | |
| |
